PTFE Tube organizer

Part of my filament storage are PTFE tubes. If I don't use the filament 4 tubes per container are loosely hanging around. That's not handy. So I've created this little organizer to get rid of them. I glued two of the clamps to one side of a container and clamp the tubes by using the natural twist of the filament to the side. Everything is easy and manageable.

As usual I've attached the Fusion 360 file to make adjustments easier for you. You will also find a factory file with the settings from my Prusa MKS2 and PLA from rigid ink. This time I've added some duplicates and processes. Each process prints one duplicate. On my Prusa I can execute all process sequential (but in one gcode file). This reduces the print time by reducing the travel time between the items. The print head does not touch the previously printed items.

Side note: I'm new to 3D printing and I've to learn everything. I believe that making things on your own from the very first step is harder but finally you will get things done. Because of that I try not to download lot of things but create them from scratch. Even if they already exists. By sharing those things I hope to get feedback that I can improve my skills. So don't be angry if I upload things which already exists here.

You can find my related things/parts here:

IKEA box SAMLA cover clamps: https://www.prusaprinters.org/prints/2943-ikea-container-samla-cover-clamps
IKEA box SAMLA Spool holder with mounting helper: https://www.prusaprinters.org/prints/2944-ikea-container-samla-spool-holder-storage
IKEA box SAMLA Spool holder spacer: https://www.prusaprinters.org/prints/2942-ikea-box-samla-spool-holder-spacer
PTFE tube caps with filament catch: https://www.prusaprinters.org/prints/2940-ptfe-tube-cap-with-filament-catch
PTFE tube organizer: https://www.prusaprinters.org/prints/2462-ptfe-tube-organizer
PTFE tube mount: https://www.prusaprinters.org/prints/2458-ptfe-tube-mount-replacement-for-pneumatic-connecto

Print instructions

Resolution: 0.2mm
Infill: 100% or lots of shells
Supports, Rafts: No