Rasbperry Pi + PoE Hat + HDMI Adapter Frame

Used to mount all PCBs together and allow for an upright position.

• Raspberry Pi 3B+
• Raspberry Pi PoE Hat
• CSI-to-HDMI Adapter

Modifications needed:

• Drill out holes of CSI Adapter to 2.5mm

Mounting Hardware needed:

• 4x M2.5x10 (Bottom 4 screws)
• 4x M2.5x12 (3x Top Screw, extra Screw for CSI adapter)
• 1x M2.5x16 (CSI Adapter into midframe)

All models have a single flat printing surface, no supports necessary.

My print settings used were:

• 0.6mm nozzle
• 0.3mm Quality Preset
• No Top/Bottom solid layers
• Infill 50% Grid