Clip-on Towel Hanger for Kitchen Faucet, Parametric

Towel hanger that clips onto a kitchen faucet, can hang up to two towels on it.

Print two of the clips. They are designed to clip onto the vertical section of a kitchen faucet and then the included nut is threaded onto the split section of the clip to secure it. There is a square hole on each clip that a corresponding peg on the towel hanger portion slots into. The pegs/holes have a 0.25mm clearance, but you can adjust this in the OpenSCAD file.

When orienting the rack portion, check the orientation of the diagonal member - it should be as in the photos to actual support the weight of the towels (starting away from the faucet at the top, and ending at the faucet at the bottom).

The 3MF file is for a ~28mm diameter faucet vertical section but can be customized in the OpenSCAD file for your faucet.

The OpenSCAD files require the BOSL2 library: https://github.com/revarbat/BOSL2

The specific version I used was f88bf2368dffddb3e10dbea3f2e40fe71f9bb903 if you have any errors.