August 2, 2022
Description
Self Watering Plant Pot With Water Indicator
The original outer pot is 150 mm in diameter for the inside pot to fit.
If you wish other dimension you can message me.
This pot is really good and it plenty of room for the plant and water and also holes for air.
I have used for Hortensia, Passion flower (Passiflora incarnata), Plectranthus scutellarioides with very good result and good health of the plant.
It is the soil that is going to suck up the water so when you put soil in make sure it is a little bit wet and pack it so is not air in between.
If you wish you can coat the pot with acrylic varnish or epoxy resin to make sure it is very water tight, but i have had no problem with leakage myself.
PLA is biodegradable and if you want better material you can use ASA filament that is also UV resistant. PTEG is also a better choice.
Brim for the inside part for better stability for the inner pot.
Water level indicator should lay on the back.
License:
Creative Commons — Attribution — Noncommercial
jonasl75
