Max Films - 3D printed Switch Films for Mx Mechanical Keyboard Switches

Never pay for switch films again.

Prusa Silcer gives a disclaimer that this model is in imperial this is wrong. Click NO on the dialogue box in order to get the correct size.

These films were deigned using the dimensions of deskeys switch films but without the middle part as I find that it doesn't do anything and makes the films harder to install.

To print make sure your slicer is set to 0.15 layer height as the thickness of these films is 0.15mm.

If you want to change the thickness of the films then you can just change it in the slicer. Just remember to unlock the scaling so you don't mess up the rest of the dimensions.

Just set them to fill your build plate and then they should print in around 10 minutes depending on the size of your build plate.