MMU-inclined birbs (Kurzgesagt fridge magnets for MMU users)

This is a first batch of my remix of Extrutim's Kurzgesagt bird fridge magnet models. The difference being that these can not be printed as separate parts and glued together, so multimaterial capabilities are a must.

I have made parts extend into each other for more solid print (beaks and feet can break off if the bond between walls isn't perfect 😕).

Models are optimized for 0.2mm layer height.

Note 1: some objects are intended to be used as shaders - you'll get an extra color in the same model! These will be 0.6mm slabs situated directly under a 0.2mm thickness skins of another part. Shaders were intended to be black or white, but you can experiment.

Note 2: in file names you'll see “up” and “down”, this indicated that the [viewed] face of the model is oriented and intended to be printed facing the build surface ("down" models) or away from it ("up" models). Face-up models have slight height differences so, unlike face-down models, you won't have a flat model - there will be something to cast a tiny shadow.

Included is a Blender file for personalization.

==============================================================

Original design belongs to Kurzgesagt. Support the creator, visit their YT channel.

Source models belong to Extrutim. Visit their Printables page.