Functional Followspot Lamp

 
PLEASE DROP A LIKE IF YOU LIKE MY MODEL, IT MEANS A LOT!

Introduction

Preview model was made in Fusion 360 and tested on Prusa MINI+ with Prusament galaxy black PLA and galaxy silver PLA (except LED holder, which was made with Pursament PETG to stand higher temperatures, but i don't think that's necessary).

Around 300 g of filament used and estimated 50 hours of printing (in 0.15mm quality).

Why did i choose to make this model? I felt like it would be cool to have it at home. Currently it serves as a desk lamp.

Non-printable parts needed for assembling:

Electronics:

MR16 EV7W LED (or any other source with GU5.3 socket)
12V 1A transformer (usually sold for LED lights)

Not important, but looks cool:
30mm fan (Raspberry Pi 5V fan for example)
40 ohm resistor (can be higher, used to transfer 12V to 5V for the fan)

Others:

Bolt 8 x M4x10 or similar
Nut 4 x M4

Bolt 3 x M3x15 (important for iris)
Bolt 2 x M3x20
Nut 3 x M3

5 colored filters + 1 frost filter

Strong glue

That's all!

All the instructions are in the photos. This is my first thing i ever created and printed, so i apologize for any mistakes i made. If you have any question, please leave a comment.

Looking foward for your makes! Enjoy!