August 3, 2022
Description
I needed a wall mount for my filament but live in an apartment so didn't want to drill into the wall 40 times so I used a 2'x4'x3/4" board and 10x1 wood screws so they don't go into the wall. Placed in the center of 8 inch squares so I was able to get 18 rolls on the board. Also made a little guide so you can mark your drill holes. I did hexagon end pieces but figured my not make more so you can choose 4,5,6,7,8,9, 10 or infinite number of sides.
Screws:
https://www.amazon.com/Hillman-GroupThe-Group-40838-Phillips/dp/B000H5OSIS
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
VG Prints
