April 9, 2023
Description
When storing your button cells in these containers you can treat them as if they were a C, AA or AAA battery. This means you don't need battery storage solutions which contain a separate section for storing button cells nor the need for separate containers.
Push the button cells into the container where they are held in place by the clamping of the two edges. Now store them as a regular battery. In order to take out a button cell simply push the button cells from the back and they will pop out of the container.
| Currently available containers | ||
| Button Cell Type | Container Size | Container Capacity |
| CR2032 | C Battery | 11 |
| CR2025 | C Battery | 13 |
| CR2016 | C Battery | 17 |
| LR44/SR44/AG13/SG13 | AA Battery | 7 |
| LR43/SR43/AG12/SG12 | AA Battery | 9 |
| LR48/SR48/AG5/SG5 | AAA Battery | 6 |
| LR66/SR66/AG4/SG4 | AAA Battery | 11 |
| LR41/SR41/AG3/SG3 | AAA Battery | 8 |
| LR60/SR60/AG1/SG1 | AAA Battery | 13 |
| Printer | MK3S |
| Nozzle | 0.4mm |
| Layer height | 0.2mm |
| Filament | Prusament PLA |
| Supports | No |
| Print time | Depends on your settings and selected model. I printed the CR2016 in 50min and the LR44 in 18min. |
Took this storage container to show that it works.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
The Pilcrow
