4" tall frame bracket for cubicle

My cubicle needed some sprucing up so I decided to hang a picture above my vertical monitor which is hanging by the 15cm extender kit already:

https://www.thingiverse.com/thing:2310298

Just print out the brace for a second time and use two frame brackets to hang your 4" (127mm) height frame.

Since the picture frame clips may be too fat to wedge between the two 3D printed brackets, I added a bump in the middle of the brackets and made the bracket clips at the top and bottom have a depth of 11.2mm. This allows the 6mm thick frame to snap into the bracket securely and still give clearance to the picture frame clips.

If you found this useful, it would bring me great joy to see your work - so be sure to share. :)

Or, better yet, please feel free to dump a bitcoin or two here:

1Py3TUeR8noBN2giHyFV1GfB6x3Kh2WEVv

... include a note to the effect of "Hi 3E8, thanks for the picture frame holder thing... my life is infinitely better on account of it and please accept this paltry amount in gratitude".

You're welcome! (in advance) :D

Also, feel free to peruse my other submissions which are almost as varied as they are many:

http://www.thingiverse.com/3E8/designs

Enjoy!

Category: Office