Electric Pencil Sharpener Replacement Cover

So, occasionally I'll stumble upon a project that's probably not worth the effort, but I carry through with it anyways.  This is one of those.

I bought this nice battery powered pencil sharpener at Goodwill and it didn't have a cover.  It didn't take a lot to figure out that there was some kind of easy-to-lose cover that went over the sharpening mechanism, so I calipered it and drafted a replacement.  

I tried to design it so that it could be printed without any support - but I had better luck printing with external support applied.

This may be delusional talk, but hopefully, this posting brings a few of them with missing covers back to life.

If you found this useful, it would bring me great joy to see your work - so be sure to share. :)

Or, just buy me a coffee:

https://www.buymeacoffee.com/Julius3E8

OR… better yet, please feel free to dump a bitcoin or two here:

1Py3TUeR8noBN2giHyFV1GfB6x3Kh2WEVv

... include a note to the effect of "Hi Julius3E8, thanks for the [insert name of thing]... my life has improved five-fold on account of it and please accept this paltry amount in gratitude".

You're welcome! (in advance) :D

Also, feel free to peruse my other submissions which are almost as varied as they are many:

https://www.printables.com/social/320993-julius3e8/models

http://www.thingiverse.com/Julius3E8/designs

Enjoy!

July 27th, 2024 update: Added a second version (coverV2.stl) that actually holds down the interlock switch better than the first one.  Also, it is a better snap in that locks it securely in place.  It's oriented to be printed without support, but if you print it with support re-oriented by 90 degrees, then the filament will give it extra strength.