CamGrip - Modular Phone Grip with Battery & Shutter

A modular phone camera grip based on SnapGrip. Features a portable battery compartment and a mount for a bluetooth shutter remote. Compatible with MagSafe, PopSocket, QuadLock, and more.

💖 Attribution

This project uses modified versions of the following designs that are licensed under the CC BY 4.0 license.

• PopSocket Mount by @adammelancon
• QuadLock Mount by @vinzcenzo

🔩 Components

Base

Phone Mounts

MagGrip can be mounted to your phone in several ways:

Caps

The CamGrip requires a total of 2 caps. One of which must be mirrored.

Other Parts

You'll also need some additional components:

🪛 Assembly Instructions

1. 3D-Print Base component.
2. 3D-Print 2 Cap components.
3. 3D-Print a Mount component.
4. Insert Power Bank into the Base component.
5. Attach the 2 Caps to the Base component using 4 M3 Screws and 4 M3 Nuts.
6. Attach the Mount to the Base component.
7. If you're using the Camera Shutter component, slide it into the corresponding Cap.
8. Attach your phone and you're done!