Car Seat Hook

This is my first PETG print! I designed a light duty hook that hangs from the headrest rod in my car. V2 is 10mm shorter on the rod end.

Update:

Designed V3 to have a deeper hook because masks were falling off too easily.

Designed V4 to be thicker where the hook attaches to the headrest.  It was 4mm thick, but is now 8mm thick.

Print Settings

Printer:

Sovol SV01

Rafts: 

No

Supports:

Yes

Resolution: 

0.2mm

Filament: Geeetech PETG White

Category: Automotive