Nut Driver Storage for DeWalt Magnetic Nut Drivers

Organizer for DeWalt Magnetic Nut Drivers

Bottom piece requires 8x3 round neodymium magnets, glued in with CA Glue.

Then you apply CA glue to the edges of bottom piece and snap in permanently.

When assembled you can drop and remove nut drivers with a click.

and they should snap to magnets on the inside.

Added version 2

for 50mm long nut drivers. Make sure you print the correct one, there are two different STL files here.

Enjoy printing, don't forget to like.

Category: Tool Holders & Boxes