Realacc XS220E top plate with VTX and Camera Mounts

Realacc XS220E top plate with VTX, Runcam Micro Camera Mounts, 45 degree antenna tube holes and separate FrSky FrSky X4RSB receiver mount, utilizing standoffs. This makes the race quad very organized with all components in their respective places.

This is the second version of this top plate. Did not like mounting camera on the bottom of the plate on the previous version because of props in view, so I designed one with top mounted camera, protected with camera guards.

Top plate includes window for channel display on VTX and pinhole for channel selection button. The plastic canopy which came with this frame looked flimsy and did not have adequate place to house all electronics.

Camera guards can use a 26mm standoff, on top of the camera for hard impacts. Not sure if you can buy this size, I used Dremel tool to cut one to custom size.

Other than that my previous version was printed out of ABS and flown frequently. Plastic did not even get warm from 600mw VTX operation. (and those things normally get really hot)

Anyway enough rambling... have fun printing and flying.

Like and comment if you find this design useful.

Category: R/C Vehicles