2200mAh 3S LiPo hard case

Setup designed to work with 2.4GhZ 2.4W WiFi amplifier for my RC Radio.

The amp cost me $35 on Amazon, instead of paying $200 for TBS Crossfire.

That is not even including receivers which you need to buy separately.

When I can't afford something, I am compelled to improvise.

1. Hard case for 3S LiPo Battery 2200mAh
2. Voltage Alarm case with 3S balance plug female connector.

3 XT-60 female plug connector mount.

To organize the connection of 2.4Ghz Amplifier to FrSky Taranis Radio.

Connected battery box with heavy duty industrial Velcro (with hooks on both sides)

Voltage alarm box printed separately and connected with double sided tape to the battery box. Amp is connected with zip ties to the handle of the radio. Still allows it to fit on a wall mount.

XT60 female connector housing is connected to the back of the radio with double sided tape. Makes this setup clean and removable for transporting the radio in it's original case, reduced print time because parts are relatively small, no supports required.

The tolerances for the lid of the battery box are exact, makes it snap on when printing in PETG.

Have fun printing and don't forget to like if you find it useful.

Category: R/C Vehicles