2.4Ghz RC Radio AMP enclosure

2.4GhZ AMP enclosure for RC Radio powered by it's own 3S batt. To increase power output of my FrSky Taranis Plus from pathetic 85mw stock, to whooping 2.5W.

Enclosure provides independent power source (3S LiPo), In order not to drain in Radio's battery. Also, voltage alarm, power switch and voltage booster, since the power needed to run the amplifier is 12V constant and lipos are dropping in voltage during normal discharge down to 10.4v and lower, which would impact Amp's peak performance.

Parts needed to complete the project:

1- Rocking switch, found in computer power supply boxes.

1-XT-60 Female Connector

1-LiPo Voltage Alarm

1-3S Lipo Battery with XT-60 Plug

1-2.5W WiFi Amplifier

Sunhans Sh-2500 2500mw Wireless Signal Repeater 33dbm Wifi Signal Booster 2.5w https://www.amazon.com/gp/product/B00HJ1NQLS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

1. DIGITEN DC 6V 5-11V to 12V 2A Step up Converter

https://www.amazon.com/gp/product/B019GY2DC8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

1.1ft 30cm Rf Electrical Connector RP-SMA Plug Straight to SMA Male Straight Assembly Digital Extension Coaxial Cable RG402 for Wireless Antenna

https://www.amazon.com/gp/product/B06XHHM4YY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Planning to connect this to FrSky Taranis XD9 with heavy duty Velcro.

Printed out of PETG my favorite material, which is perfect for outdoor use.

Please share your print results and don't forget to like it if you find it useful.

Category: Hobby