HK Diversity Receiver Mount to Ground Station Power Supply

Bought Hobby King ground station power supply with HK Diversity Receiver

Power supply comes with two mounting brackets for single receiver and none for diversity one.

So I made one.

Printed out of PETG

On Blue masking painters tape.

Print bed 80c

Print nozzle 260c

Room ambient temp to prevent warping around 80F

If that's too hot for you, than build an enclosure out of Dollar Tree foam boards around your print bed.

Nozzle Diameter 0.40

Extrusion Multiplier 1.00

Extrusion width =Auto

Retraction Speed = 1800.0

Coast at end Checked

Coasting distance 0.20

Retraction enabled

Retraction distance 5.00

Infill 70%

No supports required.

Print quality = Excellent. No stringing, very clean.

PS Added iPhone mount for HK ground station

Category: R/C Vehicles