Antenna switch enclosure, housing OK2ZI.

Hi,
This is an antenna switch housing for the OK2ZI dual antenna switch.
there is room for another PCB on top of the switch PCB. For instance that room can be used for a ESP8266 WIFI module or LORA module to switch the relays. You have to drill a hole in the Switch pcb for the supply wire to go trough. There is room between the relays to do that.

after fastening the PL259 connectors, slide and click the skirt in it's position. That way the connectors will stay protected from direct rain. The PCB can be damp and moisture protected with liquid tape.

the 3D pictures do not show the correct print orientation. For the housing you need support turned on (in the corners where the screws go)

Added a high top part in case you need more room

73 ON4NDO

Print instructions

I used PET black for thermal and UV stability.