Gammy's remix of elinanz's Easter egg

Gammy's remix of elinanz's Easter egg chick-bunny Easter decoration.

This version print-friendly.

Improvements:

• The model has been split into three individual parts for easy printing
• The nose geometry has been modified to make the model manifold

(properly connected to and a part of the body)

• The underside of the feet have been flattened
• The legs have been thickened, and an insert portion has been added, to slot

into the bottom portion of the model

• The bottom portion now has two holes to insert the feet into

Notes:

• The bottom part holes, where the feet are to be inserted, have been

constraint-adjusted to fit. There should be no need to scale them further.

• Blender and STL files are included, as well as elinanz' original stl.
• I used Tamiya Cement to attach the bottom and top portions. I needed no

adhesive or solvent to attach the legs; they're firm-fit

• I suggest painting this model, especially to hide the top/bottom seam
• Successfully printed using
  • Part 1 (Legs)
    • HIPS (240C, 110C hotbed)
    • 1.0mm walls ("perimeter")
    • 0.15mm layer height
    • 10% infill
    • No supports
  • Part 2 (Bottom)
    • HIPS (240C, 110C hotbed)
    • 1.0mm walls ("perimeter")
    • 0.2mm layer height
    • 10% infill
    • Supports touching buildplate (for the tail)
  • Part 3 (Top)
    • HIPS (240C, 110C hotbed)
    • 1.0mm walls ("perimeter")
    • 0.2mm layer height
    • 10% infill
    • Supports everywhere (for the right ear)

Print Settings

Printer Brand:

LulzBot

Printer:

Rafts:

No

Supports:

Resolution:

0.15mm for legs, 0.2mm for top/bottom

Infill:

Notes:

• Successfully printed using
  • Part 1 (Legs)
    • HIPS (240C, 110C hotbed)
    • 1.0mm walls ("perimeter")
    • 0.15mm layer height
    • 10% infill
    • No supports
  • Part 2 (Bottom)
    • HIPS (240C, 110C hotbed)
    • 1.0mm walls ("perimeter")
    • 0.2mm layer height
    • 10% infill
    • Supports touching buildplate (for the tail)
  • Part 3 (Top)
    • HIPS (240C, 110C hotbed)
    • 1.0mm walls ("perimeter")
    • 0.2mm layer height
    • 10% infill
    • Supports everywhere (for the right ear)

Post-Printing

Notes

I used Tamiya Cement to attach the bottom and top portions. I needed no adhesive or solvent to attach the legs; they're firm-fit. I suggest painting this model, especially to hide the top/bottom seam.

Category: Decor