Low-Poly Pokemons - A Door Knob Collection

⚒ No 3D printer? No time to source components?
I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop

Wanted some pokemon door knob for the kids room drawers. It didn't exist, now it does.
Some of them could definitely be used as hooks too !

How to print:

• Print with bottom/face of the knob facing down, that is the the only way to insert the M5 nut mid-print. (See gcode)

• A minimum of 3 perimeters if you are going to use it as a knob. Mine are in the kid's bedroom, I went for 5 perimeters.

• Add color swap or pause just before the M5 inner chamber start to close. See pictures and/or gcodes.

• During print, when the color swap happens, drop the M5 in its chamber. See picture. Make sure it is all the way down and can be touch by the nozzle.

• Unfortunately support are required for almost all knobs. I tried various workflows but here is the one that was the fastest and provided OK-ish results: use the paint support tool to highlight all face with overhang superior @45° then, enforce only the critical one with the smartfill selector, one by one. There might be a better way of doing it, when I use the automatic tool the M5 chamber got filled with support.

Edit 30/08/2022: I made some card holder to display the card on the side of the knob. My kid like it! (see picture) :https://www.printables.com/model/268683-card-holder-vertical-wall-display-poker-size-pokem

Hope it helps !