Voron V0.1 top panel filter

Original model:

https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/DaGrooch13/Tophat_Exhaust_Filter

The original model is not fitted on the stock V0.1 top panel, and I want make it simpler.

Because I put my printer on the balcony, and I don't want too many dust fall on my printer, so I keep my top lid close, but which will cause hotend jam when printing PLA or PETG(cuz the warm air accumulate on the top), so I want the intake some fresh air in to the chamber. In this case the 4020 fan can mount on the inside, and print the “top grill” to hold some filtering material in between.

On the other hand, if you put your printer inside, and printing some smelly material, you can print the “top fan panel” to put the 4020 fan on the out side.

I draw the CAD from scratch to make the panel size correct, and only left part and right part, which you still can fit in the V0.1 bed.

Cheers~