August 3, 2022
Description
A simple cable holder for the Festool Cleantec CT 15 E.
I do not know if this could still work with other models of. It would be possible.
Stowing the cable in the back gives you more room for accessories in the top compartment.
It is attached by screws to two holes which the vacuum has. These have a diameter of about 4mm, but are not through holes. I have used two 4.2x16mm self-tapping screws.
If you like this project, check out my other designs too!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Extrutim
