MTF Mount for Baader Steeltrack

MTF [MagneTicFocuser] mount for BAADER Steeltrack focusers

This is a mount to magnetically couple the MTF to the telescope. It fits on all Baader Steeltrack focusers.

Link to the MagneTicFocuser [MTF]

https://www.printables.com/de/model/251874-magneticfocuser-mtf

What else you need:

• 4x neodymium magnet N45 9x5 mm
• 2x M3x8 grub srew
• 1x M6 allen screw

Glue the magnets in place with a drop of superglue, press them in as far as they will go, they must be 1mm below the edge.

Attachment to the telescope:

Unscrew the knob (left) from the focuser and attach the coupling to the shaft using the two M3x8 grub screws. Unscrew the right plastic grub screw on the focuser
Slide the mount over the coupler and screw it tight with an M6x10 screw. Screw the brake screw into the left hole, but don't tighten it ;)

That was it

Happy printing!