Zipper Handle/Pull

It happens that the zipper breaks and the handle/pull no longer works. In the past, a safety pin was used as a replacement, but it looks silly and is a poor substitute.

With this model and a piece of 2 mm steel wire (AWG 14), the repair can be done in a short time and the handle can be printed in a color that matches the garment.

The holes for the hanger are about 18 mm deep and will usually hold by themselves - if the hanger is loose, you can put some glue in the holes before inserting the hanger.

>> If you like the model, please leave a like, a make or give it a rating… ;-)