Tripod End Table With Voronoi Detail (Includes Router & Drilling Templates)

This end table was designed out of necessity. It requires you to supply the timber, screws and tools necessary to build it. It was a surprisingly easy item to make using the 3D printed templates included.

Voronoi detail is in the circular mid-brace part.

Parts Supplied (To Be 3D Printed)

• End Table Top Bracket (3 required)
• End Table Foot (3 required)
• End Table Mid Brace (1 required)

Parts are printed with 4 outer perimeters for strength.

You Need To Supply

• Timber board of your choice - at least 405mm square and 17mm thick.
• Timber dowel 25.4mm (1 inch) diameter.
• 20mm timber screws (15 required).
• Makita M3700G Trimmer (Router). May fit other router/trimmers but I can't say which ones!
• 6.4mm straight plunge router bit.
• 45˚ chamfer bit.
• 2.5 or 3mm drill bit and drill.
• Philips driver bit.

Blog post with links to video guides here.

https://lannix3d.com.au/2022/08/03/end-table-with-3d-printed-parts/