Traxxas summit 1/16 LED bumpers and Lightbar

I bought a Traxxas summit 1/16 body and I did not have a front or a rear bumper, so i designed and printed some with lights. I also wanted a light bar on the roof, so desinged and printed that to.

I also did not have any stickers for the front fake lights, so i designed a thin “sticker” to 3d print and glue on. just mirror the light sticker i your slicer to get both sides.

I wired the front lights in a series connection so 6V from the reciever would not be to much volts. 

The rear lights were also wired in a series connction but with a resistor in between the LEDs so the 6V would not destroy the LEDs.

 5 mm LED.

I added a simple wiring diagram in the pictures.