Sy's Peglock - Folding Hex Keys

A lightly angled mount made to fit a Kobalt brand folding imperial hex key set. Likely to fit any similarly sized tool. Base of holding area is 22mm deep and 40mm wide. Should hold items up to 120mm tall before they do not rest properly against the backboard.

This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are universal to all models. Print with 3 perimeters and 0.3mm or thinner layer height for best results.

To mount, fold the "Board Attachment" model, insert it into the pegboard so the triangular surface points up, then slide the mount over top. With a bit of force it should fully lock into place. If needed, use a small mallet or similar to mount/remove.