Canopy for Blade 130x

This is my first attempt to create a spare canopy for the Blade 130x.

It is a bit larger than the original Canopy and hence you can easily use a 2S/600mAh battery :-)

It's a bit tricky to print. Best would be to print only one wall --> "thin wall printing".

I achieved this with the version "Blade130x_Canopy_Cutout.stl" with 0% infill and cut out the unused walls afterwards.

Another possibility is to print the "Blade130x_Canopy_0.6mm.stl" in normal way. This is easy but has a bit more weight.

Best would be to print the "Blade130x_Canopy_Shell.stl" with only one wall but I don't know how to do this with Cura or another Slicer.

I would appreciate if anyone can tell me how to manage this.

Category: Hobby