Box for eachine Lizard 95 (Version 2 with RunCam MicroSwift)

This is my improved version of the Box for Lizard 95 (previous version see https://www.thingiverse.com/thing:2472510 )

Most of all the Box was changed to fit for my modified Lizard 95 with a RunCam Micro Swift plus an ATX03 transmitter.

But it still fits to the stock model, rather more I added some options for this.

The empty space around the Skid is now used as additional spare parts box.

The closing "Bottom_Case_Closing.stl" is fixed with the part "Snap.stl" that must be mounted with an M3 screw at the bottom part "Case_bottom_Skid.stl".

For those who don't use my Landing Skid (https://www.thingiverse.com/thing:2472520) I have provided a smaller bottom case with some fixtures (Case_bottom_woSkid.stl).

If you want to create other parts around the Lizard I provided my simplified Lizard model as .stl and .obj.

Changing the stock camera to a RunCam Micro Swift is very easy:

1. remove the cfk camera holder and reinstall it by rotation of 180° (so that the original camera would look backwards)
2. remove the stock camera
3. mount the printed part "ATX03_Antenna_holder" in the upper holes where the stock camera was fixed.
4. mount the TX03 transmitter with some potection foam and a cable tie. The antenna position can be moved up and down as you like.
5. drill a 2mm hole in the middle of a spare bolt and mount the Micro Cam with its frame here using an M2 srew and mount them on the cfk parts as shown on the pictures.

Category: Hobby