Presonus Eris 5 Studio Monitor Stand (Facing down)

Designed for the studio monitors that are standing on the desk stands. But because they stay behind the monitors, I needed to give a rise. But also required to face the monitors downwards, for sure.

With the brackets on the sides and front curved bead, it covers the monitor pretty snug.

There is only 10° angle. Height: back 35mm, front ~5mm. 

I used 40% and satisfied with the result.

Printed in 5h26m with FFV5.0_(0.32) Hyper-fast BETA*

This was an experimental print, that I tested out the quality of Hyper-fast but .32 mm! The result is pleasing, as it won't be visible after installing.

2nd is printed in .20 mm, with another Chep's profile. Even improved the resolution significantly, the printing time only increased by an hour with the FFV5.0_(0.20) ExtraFast profile.

I uploaded the Fusion 360 file as well. Modify or improve, depending on your need.

Eris E5 | Dimensions

Width 7” (178 mm)
Depth 7.68” (195 mm)
Height 10.24” (260 mm)
Weight 10.2 lbs (4.63 kg)

Print LOGS

.20 mm - https://www.3dprintlog.com/prints/88284
.32 mm - https://www.3dprintlog.com/prints/88126

Please share if you make or remix it.