June 8, 2023
Description
A single-piece Airbox / Airfilter for the Sachs 503 Moped or all other Carburators which use a 20mm connection.
You need to pause the 3D Print in the right moment so you can place the actual filter. This can easily be done in the Prusa Slicer and a sample GCode is attached. This is the standard air filter to use.
The Airflow of this filter can be adjusted by using the different kind of tubes available, they can easily be screwed in and changed quickly.
It is recomended to print this in TPU (Flexfill 98A) and 7 perimeters.
Updates:
June 8th 2023 - Added a version for the new 17mm Swiing Carburator with 28mm connection flanch.
License:
Creative Commons — Attribution — Noncommercial
8
chixxi
