FT5 Z Stop FolgerTech Titan V6

This is a modification from the original by Morskipas. I extended it to allow for the longer body of the E3D Titan V6 mounted on the 713Maker.com bracket.

I will be modifying this as needed.

Assembly is easy.

1. Print with orientation as shown in the image.
2. Disconnect from power
3. Remove Z stop from the thin supplied bracket
4. Install it on the newly printed bracket (there is space for back of board solder tails)
5. Install T nuts and hex bolts
6. Install on 20 20 rail
7. Get long bolt and a nut left over from the build (should have a few left over).
8. Get a small washer and a pen spring (rip apart an old pen, not your wife's favorite)
9. Get a square nut for the top.
10. Put it all together as shown in the photo.

That is it, just get it rough with an auto- home and then do fine adjustments by moving the screw up or down as needed

Print Settings

Printer:

FolgerTech FT5

Rafts:

Supports:

No

Resolution:

Infill:

95%

Notes:

Post-Printing =============

Assemble as shown here

Part 1. Part 2 will include this bracket (I am filming this right now)

How I Designed This ===================

What I used?

Category: 3D Printer Parts