Single line earrings

This design is simple to print. Only problem I have found was removing it from a print bed because some filaments adhese too well to print bed. I prevented this by lowering the heatbed temperature and I didn't apply any adhesive before printing and after printing I carefully removed earrings with a spatula.

I have made and tested three versions which only differ by width of line. The first is 0.4mm, the second is 0.8mm and the third is 1.0mm thick and all of them are 1.6mm tall. 

The First 0.4mm thick version is the easiest to damage. It's lightweight and springly but I often accidentally bent some of the longer curves and they never came back to their original shape.

The Second 0.8mm thick version is pretty good. If you are printing with 0.4 nozzle it will be 2 perimeters but that doesn't really matter and the whole earring feels much more sturdy than the 0.4mm one. It is still lightweight but a little bit less springy and thets to return to its original shape when you bend it. But still be careful it can still be easily damaged.

The third 1.0mm thick version came out as the best by my testing. It is still lightweight but the most durable of all versions I have tested. I highly recommend printing this version.

I completed earrings with these jump rings and these earring hooks (those from the links are available only in Czechia and Slovakia, but you can definitely find similar shops elsewhere in the world)