ISO30 / BT30 Taper Wall Holder

We use this to wall mount tooling for our ZX45 mill at Stockholm Makerspace.

You can use this for any kind of 30-taper tooling, and the bottom is open to accommodate different styles of pull studs if that is something you do have on your tooling.

The mount is made to be mounted with two truss head screws, and there are holes in the holder to get in with the screwdriver to tighten them down.

There are two versions included. The version with the drive dogs on the sides is specifically for BT30 tooling, but the plain ISO30 version is universal and will work for either, also does not require you to insert the tool in a specific direction, so that is the one I would recommend.