Water cooling for can (500 ml)

I remixed this can holder to make it even better. The holes in the base and also in the cap are made so that the water can reach the can and cool it down. You can e.g. attach it to some stick and make it flow on the river or (as I did) attach it to PaddleBoard, so that when you want to drink some cold drink you can whenever you want (but don't use it with opened can)!

Print settings:

• No supports
• Infill:
  • 20% to make it flow on the water
  • 100% to make it completely sink (hopefully, not tested yet)
• 0.2mm layer height

Post processing:

1. When you are done printing you have to find some string (stronger better) through the two holes in the cap.
2. Now make strong knot with both ends of the string (you can use lighter to make it in place)
3. Now just place your can into the holder, screw both parts together and you're done!
4. Additionally you can place some rock on the bottom to make it sink better or attach e.g. this carabine as i did.