Telescoping Flag Pole replacements

These are for a standard 20' by 3" diameter telescoping pole. The top is for mounting the gold ball or Eagle. Then a flag clip, plus a ring to keep it at the top which you need to drill for the original screws. Then another clip that floats along the top section. The clip  can be sized  in Pruserslicer to fit the lower section for flying the flag at half mast (Mine wasn't broken yet so I only made the top clip). Printed at .20 with 25% fill with PETG as it's hot here and didn't need it to melt or deform. :-)

Seen flow the clips is my Solar holder https://www.printables.com/model/253618-flag-pole-solar-light-holder