Pop-Socket Clip

This is a #3dp practical gadget. This allows you to take the Pop-Socket off when you don't need it.
This design is tested in real life and works. </b>

So, you might know the situation: On the couch you want the Socket, but in your pocket or for wireless charging you can't have one. I was surprised this gadget didn't exist already.

I provide the Fusion 360 file for this model, so that you can customise your clip for your phone. The design is 100 % parametric and easy to change. Simply adapt WidthPhone and HeightPhone, so it fits your device.


In case you don't have access to Fusion 360, shoot me a message with your dimensions and I'll generate your custom.stl for a donation.

If you like what you are seeing, please consider following me.

prusaprinters.org/frankdeschner/

There will be more practical #3dp prints regularly.

Print instructions

Printer: Prusa MK3s

Orientation: Upright

Resolution: 0,2 mm

Infill: 100 %

Brim: Yes

Filament

You can print with whatever filament you have on hand.

I used inland PETG black Micro Center PETG

Note

When you lose tension of the clip (particularly with PLA),

re-shape it with a heat gun/blow dryer/hot water.