Adjustable Metal Shelving

This hanger is designed to slot into the keyholes on my adjustable metal shelving, and support a my Walker's Razor Electronic Earmuffs.

The main dimensions that you need to be concerned about if you wish to design your own are the following (my values are inserted for reference):

Large Hole Diameter: 14 mm hole → 13 mm key.

Slot Width: 7.5 mm → 7.5 mm.

Center-to-Center slot spacing: ~36 mm.

Leg Thickness: 1.5 mm → 1.8 mm.

For printing: I printed the part along its hypotenuse, and I added supports blocks modifiers to encompass the entirely of the key pegs. See included CURA screenshot.

Printed with a 0.4 mm nozzle, minimal support, 0.28 layer height, PLA+.

I have also included the a test print file as reference, that can be printed on its back with support around the upper sections of the key pegs.