Woman Vase Torso Sculpture

Hi 

this is a torso model made with a free form tool in CAD. 
Hope this does not count as nudty. 
The model has some overhang, make a testprint in the “upper body area” to check if your printer/material will create warpage.

Print instructions
1. I scaled the model a bit bigger. ( X,Y,Z = 1.4)
2. I used vase mode with a high wall thickness / layer width of 0.65mm on my 0.4mm nozzle.
3. I set 3 bottom an 5 top solid layers.
4. No infil was used althought I had trouble to get connection on the upper solids due to no infill with vase mode. 

*WARNING when using the GCODE
refering to print insctructions No4. The TOP solid Layers have hard times to connect due to large overhang. Actually I did something really dirty and I am ashamed. When I noticed that the upper solid layer did not connect due to the large overhang, I pushed the model with my finger so the nozzle touched the single walls better). I am sure you can create a better GCODE yourself