Dyson V11 Attachment holders

The idea and design was somewhat inspired by

https://www.printables.com/model/29577-dyson-v11-wall-bracket-for-accessories-wandhalteru%2Fcomments

I had a few things about it that didn't fit my needs so I made my own. All of them are hung with 2 drywall screws, except V3 uses 1 drywall screw and 1 pan head screw. They are designed to be made out of PLA as they have the recycle logo. PLA is strong enough and for indoor use temp should not be a problem. There are 3 types.

V1 = will hold 2 attachments. 1 of the attachments can be a power type that needs a plug (see the 4th pic) it sticks out farther from the wall also.

V2 = Holds 2 and is close to the wall (the middle one in the main picture)

V3 = is at an angle and only holds 1. Its for the odd shaped brush (on left in main picture or see 5th pic)