Guitar Dot Inlay

This are dot style inlays for an electric guitar/bass guitar neck. They measure 7mm in diameter and 5mm thick. If the holes on you guitar are different it's not to difficult to change the dimensions.

May need some slight clean up around the bottom but after you've printed them you should be able to lightly tap them into place with a hammer.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.24

Infill:

Filament: 3DFillies PLA+ Whatever colour you want Post-Printing =============

Category: Other