Magnetic Spool Drawer Organizing Box with Name Tags

Just another take at the popular filament spool drawer design. This one adds a few improvements like magnetic latch system, customizable compartment sizes and slots for fitting name tags to show the compartment contents.

The spools I used measure 198mm (outer diameter) by 58mm (inner diameter) by 64mm (height). The internal curve of the drawer has an 80mm diameter.

You will need 4x M2.5x20mm screws for the hinges and four 8x3mm cylindrical neodymium magnets for the latches. Make sure you place them in the correct orientation to avoid having the drawers repel each other, rather than attracting each other and latching.

This model has been designed so that it can be printed quickly using a 0.8mm nozzle. Of course, it can be printed with a 0.4mm nozzle, if you have the patience.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.4 with 0.8mm Nozzle

Infill:

Category: Organization