Screwless Wall Plates

Custom, screwless wall plates. I needed a 3-gang wall plate that had a rocker switch in the middle and toggle switches on the outside. I initially considered using WALLY - Wall Plate Customizer, but I wanted the screwless look, so I made these designs.

On my personal prints, I also added some engraved text to describe each switch on my personal wall plates. The lettering is not included in these STL files.

To be clear, you still need screws, but they are not visible once installed. You'll need the same screws as you would need for normal wall plate openings for each Toggle or Rocker switch.

Recommend printing with:

• PLA filament
• Without supports