August 14, 2022
Description
This is a cover for the ZWO M42 filter drawer. Allows the filter drawer opening to be covered while a filter is not installed.
This does not hold a filter, it is simply a blank to cover the opening while the filter tray is removed.
Suits this product: https://astronomy-imaging-camera.com/product/zwo-filter-drawer-m42
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
20%
Filament: 3D Fillies PETG Black
Notes:
I print this with 4 walls though 2 should be fine.
PLA should be OK as well, though I used PETG for this.
Any layer height should be fine. My Artillery X1 does a nice job with PETG at 0.3mm which is why I went with that. At 30mm/s it printed in under an hour.
I flame the inside to remove any whispy stringy bits - don't need those inside my telescope!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
BigNoel
