Batman Popvinyl Pedestal

A simple pedestal for displaying a Batman Popvinyl figurine.

The print shown in the images was printed with the logo on the top to allow for a color change filament swap on single extruder printer.

I designed this with a small cavity on the bottom to allow for the placement of 2 way tape to keep the pedestal in place. I ended up using supports for this with the orientation I chose to print (with the logo on top), in order to facilitate the color change I mentioned above, but they probably weren't needed.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Category: Decor