July 31, 2024
Description
More photos, including close ups and different filaments:
https://www.instagram.com/p/ChSSCyCNl7l/
and
https://www.instagram.com/p/ChXQl55Nwem/
and
https://www.instagram.com/p/ChcnSgstmgX/
---
More Beer Mugs
https://www.printables.com/@C47_3d/collections/758477
Version 2021
Chmielaki's 2021 Beer Mug by C47_3D - Thingiverse
---
It is made for decoration or for holding a bottled beer (100% size), beer can (94%) or a 0,5l plastic cup (120%)
I mostly using it with beer cup on festival - it's much easier to hold it or to drink from it than from cup alone
Fits standard diameter beer bottle (there is a 72mm hole).
You can resize the model in slicer for different diameters.
Use the equation:
X / 72 * 100%
where X stands for the diameter you want with added 2mm (for a 'safe distance')
So for example for a beer can (66mm, so X will be 68) you need 94,5% size
For a 0.5l plastic cup go with 120%
Remember to check the widest area (like the bottom of the bottle)
---
Printed on Voron 0.1 with Silver PLA from Colorfil
and on JGMaker A1 with Silk Gold PLA from Devil Desing and Rust Copper PLA from Spectrum
Designed and sculpted in Blender 3D
---
Silver one (100% size) printed with 0.4mm nozzle
Gold one (120% size) with 0.6mm
0.2mm layer height
2 walls (perimeters)
10-15% gyroid infill
7 top and 5 bottom layers
No supports
On 100% and this options it should use around 85g of filament
On 120% around 120g
Z-seam set to 'user specified' and set for center so the seam will be on the right side, mostly hidden by hadle
---
UPDATE 16 II 2024
Added a clean version of a mug. Without text, emblem or hop
Can be used to personalize a mug - but only for private use
---
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
C47_3d
