August 17, 2022
Description
In order to use both hands with the Parkside-Lidl PFBS 12 pen drill, I designed this simple two-piece holder that is easy to apply and remove.
The decision to keep the device blocked mainly by friction in the rear support stems from the need to be able to remove it easily, without complicated screw disassembly. On the other hand, the power level of the appliance makes this solution quite safe and practicable.
The front support is screwed by means of metric M20x1.5 thread, replacing the collar supplied.
If desired, the rear support can also be locked with clamps screwed onto its side flaps or used resting on the table.
I' publish also a modified front support with a better protection.
ATTENTION: The support is NOT designed for use with power appliances, connected to the mains but only with low-power batteries.
License:
Creative Commons — Attribution — Noncommercial
9
Afruzu
