August 20, 2022
Description
A simple stand for special knives.
The model can be easily scaled via the slicer, depending on how big your knife is.
The decoupling of the xyz dimmensions is helpful.
The original model has a length of 250mm, at the point where the knife rests with the handle is 70mm high. The width of the fork is about 27mm. The knife in the photo has a length of 310mm.
The base plate of the model is 70mm wide, one centimeter narrower than the printed model in the photos.
If you like this project, check out my other designs too!
License:
Creative Commons — Attribution — Share Alike
Extrutim
