CR-6 SE Front SD Card and USB Cover

V4 - Updated 08/25/2021: Redesigned my file from scratch in Fusion 360 to simply the CAD model.

1. Instead of chamfers for all the edges, I used fillets.
2. Made all walls a consistent thickness of 3mm.
3. Increased the size of the font for easier printing.
4. Increased the engraving to 1.5mm.

V3 - Updated 08/24/2021: Made some adjustments to the cover for a better overall fit.

1. Made the walls thinner to reduce filament used.
2. Moved the logo to the right a little.
3. Increased the height of the cable cutout.
4. Moved the screw holes down so the top of the cover is flush with the top of the printer.
5. Reduced the size of the chamfers.

V2 - Updated 04/23/2021 - Rotated the Creality logo into the correct orientation.

Since I use a Raspberry Pi 4 Model B and Octoprint to send gcode files to my CR-6 SE, I no longer require access to the SD card slot. Plus, the RPi4 stays connected all the time via the micro-USB cable. To protect both the SD card slot and USB cable, I created this cover for the front of the CR-6 SE.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Filament: SpiderMaker Matte PLA While

Notes:

Category: 3D Printer Parts